Big Time Gardens

Spider Mite Control Guide for Commercial Cannabis Growers

austin sherman — Tue, 29 Jul 2025 20:16:05 +0000

Spider Mite Control Guide for Commercial Cannabis Growers

Spider Mites: A Serious Threat to Cannabis Crops Spider mites (especially the two-spotted spider mite Tetranychus urticae) are one of the most destructive pests in cannabis cultivation. These microscopic arachnids feed by piercing plant cells and sucking out the contents, which causes tiny white or yellow “stippling” spots on leaves as an early symptom. As feeding continues, leaves may become bronzed, yellow, or dry and can drop off prematurely . In heavy infestations, fine silk webbing will cover foliage and even buds – a telltale sign that the mite population has exploded. Entire colas (flower clusters) can become shrouded in webbing and speckled with mites and eggs, rendering the buds unsalable. If left unchecked, spider mites can rapidly ruin a cannabis crop, with yield losses up to 40–60% reported in other plants.

The reproductive cycle of spider mites makes them especially dangerous. A single female can lay dozens of eggs in her short lifetime (often 100+ eggs per female), and those eggs hatch in just a few days under warm conditions. At optimal temperatures (around 86 °F), a spider mite can go from egg to egg-laying adult in only about 7 days. This means populations can increase exponentially – studies show mite numbers can 70-fold in under a week during hot, dry weather. In practical terms, just one or two mites can turn into thousands within a month if conditions favor them . Such explosive growth, combined with their tendency to go unnoticed until damage is apparent, makes spider mites a nightmare for cannabis growers.

Infestations often start on the undersides of leaves and at lower parts of the plant, then rapidly spread upward as the plant’s health declines. By the time webbing is visible, the outbreak is severe and immediate action is required.

The Need for Fast, Residue-Free Solutions in Cannabis Unlike food crops, cannabis is typically inhaled or ingested without further processing, so any pesticide residues on buds can pose health risks to consumers and cause products to fail state testing requirements. Cannabis growers therefore face strict regulations and consumer expectations to keep their product free of harmful chemical residues. Many conventional chemical miticides (such as avermectins or pyrethroids) are not approved for use on cannabis due to safety concerns, and spider mites have developed resistance to many of them in any case . Commercial cultivators need solutions that can knock down mites quickly and be used right up to harvest without contaminating the flowers.

Big Time Exterminator (BTE) is an example of a modern cannabis-safe miticide that meets these needs. It is a 99.999% organic contact pesticide designed for use on cannabis plants. BTE leaves no odor, taste, or lasting residue on the buds – it breaks down into inert components within about 48 hours of application. This means it can be applied even in the late flowering stage without fear of contaminating the harvest. In fact, BTE is labeled for daily use right up to the day of harvest if needed. This rapid degradation and lack of residuals are crucial for maintaining compliance with testing and ensuring a clean, safe final product. When spider mites threaten a valuable cannabis crop, growers require a fast-acting, “zero-residue” solution, and Big Time Exterminator is engineered to provide exactly that.

Beyond regulatory concerns, using a residue-free product like BTE also prevents any negative impact on bud quality. Oil-based sprays (e.g. neem oil) or sulfur can leave films, odors, or flavors on cannabis flowers and even “burn” pistils or terpenes late in bloom. By contrast, BTE’s formula contains no oils or heavy solvents – it is water-based and uses natural active ingredients – so it won’t damage trichomes or alter the taste/aroma of the buds when used as directed. For professional growers, this means problems like spider mites can be addressed aggressively without sacrificing product quality or marketability. In short, Big Time Exterminator allows for rapid eradication of mites with minimal downtime and no chemical after-effects, which is exactly what modern cannabis IPM programs demand.

Early Identification of Spider Mite Infestations Detecting spider mites early is critical to preventing full-blown outbreaks. Cannabis growers and IPM scouts should regularly inspect plants for the following tell-tale signs (in roughly the order they appear):

Speckled Leaves – Tiny Dots: The first evidence of spider mites is often faint white, yellow, or rust-colored specks on the tops of fan leaves. These pinpoint spots are mite feeding marks (where cells have been sucked dry) . They often appear in clusters or patches. Growers may mistake this stippling for nutrient deficiencies or heat stress at first, so it’s important to examine any speckling up close.

Mites on Undersides: Using a 10× hand lens or microscope, check the underside of affected leaves. Spider mites are extremely small (adults ~0.4 mm, about the size of a dust speck) and range from translucent yellowish to green with two dark spots (two-spotted mites) or even reddish-brown in color . You might see tiny slow-moving dots and even clear, spherical eggs attached to the leaf undersides or nestled in fine silk webbing . A classic scouting method is to tap or gently shake a leaf over a white sheet of paper – if mites are present, you’ll see tiny specks moving on the paper. Early on, mites tend to cluster on lower leaves and inner canopy where it’s dry and sheltered.

Leaf Discoloration and Damage: As the infestation grows, affected leaves will show increasingly heavy stippling (many specks merging), and may turn pale, yellow, or bronze in color . The foliage starts to look mottled or “rusty”. Edges of leaves might curl and the overall vigor of the plant declines. Heavily infested leaves eventually dry out to a crisp and die.

Webbing: Fine webbing on the plant is a late-stage sign of spider mites. Mites produce silk webbing both for protection and to help disperse to new leaves. You may first notice thin strands of web on the underside of leaves or between leaf petioles. In a severe infestation, a gauzy web can cover large portions of leaves, growing tips, and even buds. Spider mites get their name from this webbing. If you see webs, the mite population is very high – action is overdue. Webs often collect dust and mite droppings, giving the plant a dirty appearance .

“Burnt” or Ruined Buds: In the worst cases (typically if mites explode during flowering), entire colas can become encased in spider mite webs and massive numbers of mites. Buds may appear cobweb-coated, brown, or necrotic. Such flowers are unsalvageable – they will smell and taste foul due to the infestation and must be discarded. The goal is to never let it reach this stage by catching mites early.

Regular scouting is essential. Commercial growers should have an IPM scout or trained staff inspect plants at least once or twice weekly, especially in warmer, drier periods. Focus on high-risk areas: the lower canopy, plants near entrances/vents (mites often enter with incoming air or on workers’ clothes), and any “hot spots” where plants look stressed. Use magnification to check underside of a few leaves per plant. Also inspect any incoming clones or plant material rigorously, as clones are a common source of spider mite introduction . If even a single mite or egg is found, treat immediately and thoroughly – don’t wait for more evidence. Early detection and prompt response can literally save your crop, since minor infestations are far easier to control than outbreaks that are noticed late.

(Tip: Spider mites thrive in hot, dry, stagnant conditions. If you notice your grow room climate trending toward

high temperatures (>80–85 °F) and low humidity (<30% RH), be extra vigilant for mite symptoms, as these

conditions accelerate their reproduction. Also, always quarantine and inspect new clones from other facilities –

assume any incoming plant “has mites” until proven otherwise .)

Applying Big Time Exterminator (BTE) for Spider Mite Control Once spider mites have been identified, rapid and repeated treatment is crucial to eradicate them. Big Time Exterminator should be the centerpiece of your control program, providing a fast knockdown of mites at all life stages. Below is a step-by-step guide to using BTE effectively in a commercial cannabis grow:

1. Preparation and Dilution: BTE is a highly concentrated liquid and must be diluted in water for foliar application. The manufacturer’s recommended dilution for foliar spray ranges from 30 mL to 175 mL of BTE per gallon of water, depending on pest pressure. For an active spider mite infestation, start around the middle-to-high end of this range – a common mix is ~80 mL per gallon of water. (In severe cases with dense canopy or mite webs, some growers go up to 150–175 mL/gal for extra power.) Always mix thoroughly in clean, cold water – using cold water can improve efficacy as mites are sluggish at cooler temperatures. The BTE solution is slightly acidic; ensure the final spray solution is roughly pH 6.0–7.0 for optimal results.

2. Spraying Technique: Apply BTE as a foliar spray to all affected and surrounding plants. For best results, use an atomizer or misting sprayer that can generate a very fine droplet – this helps distribute the product evenly and reach mites hiding on leaf undersides. It’s recommended to spray at lights-off (night cycle) or after natural sunset in greenhouse grows. This prevents the spray from drying too quickly or “burning” leaves under intense light. In indoor facilities, turn off HPS/LED lights and let the area cool slightly before spraying (BTE works best at normal room temps, not when leaves are heat-stressed). Thorough coverage is key: drench every plant from top to bottom, including the undersides of leaves and deep into any buds (if in flower) where mites are present. Mites often hide in crevices, so take time to cover all surfaces. Avoid spraying so heavily that runoff drips, but the foliage should be uniformly wet.

3. Environmental Considerations: After spraying, increase air circulation in the grow area to help plants dry and to avoid excessive humidity (which can invite mold in flowering plants). If you are in mid-to-late flowering (week 5 or later), it’s especially important to use fans or ventilation after spraying to ensure buds dry promptly. BTE leaves no oily residue, so it evaporates cleanly, but the added moisture from spraying large canopies needs to be managed. Do not spray BTE in direct sunlight or with grow lights on, as intense light on wet leaves can cause phototoxic stress. Always wear appropriate PPE (mask, goggles, gloves) when spraying in enclosed spaces, even though BTE is organic – you want to avoid breathing in mist or getting it in your eyes.

4. Frequency of Application: Spider mite eggs hatch fast, so a single treatment is not enough. Plan to repeat the BTE spray once per day (or every 2 days at minimum) for a 10–14 day period to hit multiple mite generations. Consistent daily spraying ensures that as new eggs hatch, the larvae are immediately killed before they can mature and lay more eggs. In practice, many growers do an initial heavy application, then follow up daily for about 1 week, and then continue every 2–3 days in the second week as populations decline. Monitor the plants closely – you should see a dramatic reduction in live mites after the first 1–3 treatments. If any pockets of mites survive, maintain the daily spray regimen for the full two weeks. Do not discontinue early even if you don’t see mites; their eggs or juveniles could be quietly waiting. After two weeks, if no mites are observed, you can taper to a preventative maintenance spray (see IPM section).

5. Late-Flowering and Harvest Considerations: One of BTE’s greatest advantages is that it is safe to use in flowering, even late in bloom. It contains no persistent chemicals and breaks down within 48 hours, so it will not leave residues on buds. The label permits use up to 2–3 days before harvest with no adverse effects on the crop. In emergency scenarios, growers have even used it the day of harvest to knock off mites, then allowed buds to dry, with no residue or flavor carried into the final product. While it’s best to control mites well before harvest, it’s reassuring that BTE can be a “clean-up” spray in final days if needed. After spraying, re-entry interval (REI) for workers is minimal – once the spray has dried (usually within an hour or two), it is safe for staff to work among the plants since BTE’s ingredients are non-toxic to people (only 0.01% of it is a mild food-grade preservative). Always follow any state or local worker safety guidelines, but generally BTE does not require a long wait before re-entry (unlike many chemical pesticides that have 4- hour or 12-hour REIs).

6. Optional – Pre-Rinse for Heavy Webbing: If plants are completely covered in webbing (e.g. you caught the infestation very late), an effective tactic is to pre-rinse or “knock down” webs with plain water before applying BTE. For example, using an atomizer or garden hose set to a fine mist, spray the plants with icecold water first. Spider mites are stunned by cold water (they hate temperatures below ~45 °F) and many will be physically dislodged. This also helps wash off dust, debris, and some webbing from leaves, improving BTE’s contact with the remaining mites. After letting the water drip dry for ~30 minutes, follow up immediately with a thorough BTE spray as described. This two-step approach (cold water then BTE) can be very useful in extreme infestations or when dealing with microscopic mites like russet mites in addition to spider mites. It essentially “cleans the canvas” for BTE to work most effectively. By following these steps, Big Time Exterminator will act quickly to eliminate active spider mites, nymphs, and eggs on contact. It is both a curative and preventative treatment, meaning that a full course of applications will not only cure the current outbreak but also protect the crop from re-infestation during that period. Always remember to calibrate sprayers, cover all plant surfaces, and maintain the schedule – consistency is key to wiping out mites for good.

The post Spider Mite Control Guide for Commercial Cannabis Growers appeared first on Big Time Gardens.

Harnessing the Power of Enzymatic Pesticides with Big Time Exterminator: A Natural IPM Solution for Pest Control

austin sherman — Mon, 05 Aug 2024 16:52:51 +0000

In the world of pest control, there has been a significant shift towards more natural and eco-friendly solutions. One of the leading innovations in this field is enzymatic pesticides is, Big Time Exterminator, which offer a potent and non-toxic way to combat common garden pests like spider mites, russet mites, and root aphids. Big Time Exterminator has emerged as a frontrunner in the commercial cannabis industry, providing an effective, environmentally safe, and cost effective alternative to traditional chemical pesticides.

What Are Enzymatic Pesticides?

Enzymatic pesticides utilize natural enzymes to target and dismantle the cellular structures of pests. These enzymes break down proteins, fats, and other essential components, leading to the pest’s death without harming beneficial insects, plants, or the surrounding environment. This method stands in contrast to traditional pesticides, which often contain harsh chemicals that can linger in the soil and water, posing risks to both human health and wildlife.

The Battle Against Spider Mites

Spider mites are a common and destructive pest in both indoor and outdoor gardens. They feed on plant sap, causing discoloration, reduced vigor, and sometimes plant death. Traditional methods of controlling spider mites often involve chemical pesticides that can be harmful to the plants and the environment. However, enzymatic pesticides like “Big Time Exterminator” offer a safe and effective alternative.

Research has shown that enzymatic treatments can significantly reduce spider mite populations. The enzymes work by breaking down the mite’s exoskeleton and digestive systems, effectively neutralizing the threat. Additionally, since enzymatic pesticides are biodegradable, they do not leave harmful residues that could affect future plantings or the ecosystem.

Tackling Russet Mites with Enzymes

Russet mites are microscopic pests that can cause severe damage to crops, particularly in high-value plants like cannabis and tomatoes. These mites feed on plant tissues, leading to bronzing, leaf curling, and reduced yield. Given their small size and rapid reproduction rate, russet mites can be challenging to control with conventional pesticides.

Big Time Exterminator has been shown to be highly effective against russet mites. The enzymes penetrate the mite’s protective layers, breaking down vital proteins and causing desiccation. This method ensures that the mites are eliminated without the need for toxic chemicals, making it a safer choice for both growers and consumers.

Root Aphids: A Hidden Menace

Root aphids are another formidable pest that can wreak havoc on a garden. They attack the root system of plants, sucking out nutrients and causing stunted growth, yellowing leaves, and reduced yields. Because they reside in the soil, root aphids can be particularly challenging to detect and treat.

Enzymatic pesticides offer a promising solution for root aphid infestations. By applying a product like “Big Time Exterminator” to the soil, growers can target these pests directly at the source. The enzymes degrade the aphid’s outer coating and digestive enzymes, leading to their demise. This approach not only controls the aphid population but also helps to maintain a healthy soil ecosystem.

Comparing with Competitors

While there are several enzymatic pesticides on the market, Big Time Exterminator stands out for its broad-spectrum effectiveness and ease of use. Its formulation is designed to tackle a wide range of pests while being safe for use around beneficial insects and pets. Moreover, the product’s eco-friendly nature makes it an ideal choice for organic and sustainable gardening practices. Finally, we will beat any advertised price of any from any our competitors.

Conclusion

Enzymatic pesticides represent a significant advancement in pest control, offering a natural and effective way to manage common garden pests like spider mites, russet mites, and root aphids. Products like “Big Time Exterminator” provide a powerful alternative to chemical pesticides, ensuring that gardens remain healthy and productive without compromising environmental safety. As research continues to support the efficacy of enzymatic solutions, more gardeners are likely to make the switch to these innovative and sustainable products.

The post Harnessing the Power of Enzymatic Pesticides with Big Time Exterminator: A Natural IPM Solution for Pest Control appeared first on Big Time Gardens.

The Perfect Extractor: 200 Proof Food Grade Ethanol vs. Moonshine and Everclear

austin sherman — Sat, 14 Oct 2023 10:53:37 +0000

Introduction

When it comes to extracting compounds from botanicals, there’s a critical choice to be made: the solvent. Among the options available, 200 proof food grade ethanol stands out as a superior choice compared to moonshine and Everclear. In this blog post, we will explore why 200 proof food grade ethanol is the top choice for extraction purposes, highlighting its purity, safety, and efficacy.

Purity
One of the most significant advantages of using 200 proof food grade ethanol for extraction is its purity. Food grade ethanol is highly refined and produced specifically for human consumption, making it safe and free from impurities that can negatively impact your extractions.

Moonshine, on the other hand, is often made in less regulated environments, and its purity varies greatly. It can contain impurities, including methanol, which is toxic and can be harmful if ingested.

Everclear, while produced for human consumption, is not as rigorously purified as 200 proof ethanol. It typically contains more water, which can affect the efficiency of your extraction process.

Safety
Safety is a paramount concern when working with solvents for extraction purposes. 200 proof food grade ethanol is the safest option for several reasons:

It is produced following strict regulatory standards, ensuring that it is free from contaminants and meets stringent quality control criteria.

Its high proof (100% alcohol content) minimizes the risk of microbial contamination, making it safer for handling and storage.

In contrast, moonshine is often produced in unregulated environments, leading to significant safety concerns. The risk of impurities, including methanol, poses a real danger to those who consume or handle it.

Everclear is relatively safe compared to moonshine, but it still contains some water content that can increase the risk of microbial contamination and pose safety concerns in certain applications.

Efficacy
The effectiveness of your extraction process largely depends on the solvent’s ability to dissolve and extract the desired compounds. 200 proof food grade ethanol excels in this regard:

Its high alcohol content ensures efficient extraction of a wide range of compounds, including cannabinoids, essential oils, and other botanical constituents.

The purity of 200 proof ethanol guarantees that it won’t introduce unwanted flavors or impurities into your extracts, preserving their quality.

Moonshine may not have the same extraction efficiency as 200 proof ethanol due to its varying alcohol content and impurities.

Everclear, while a good choice for some extractions, may not be as effective as 200 proof ethanol due to its lower alcohol content.

Conclusion

In the world of extraction, the choice of solvent can make or break the quality and safety of your end product. When it comes to selecting the best solvent for your extraction needs, 200 proof food grade ethanol stands head and shoulders above moonshine and Everclear.

Its exceptional purity, safety, and efficacy make it the preferred choice for professionals in the industry. Whether you’re extracting cannabinoids, essential oils, or other valuable compounds, 200 proof ethanol ensures that your final product is of the highest quality and free from harmful impurities.

So, when it comes to extraction, don’t compromise. Choose 200 proof food grade ethanol for the best results and peace of mind in your extraction processes.

The post The Perfect Extractor: 200 Proof Food Grade Ethanol vs. Moonshine and Everclear appeared first on Big Time Gardens.

Big Time Exterminator: The Unexpected Hero in the Cannabis Chronicles S:01 E:01

austin sherman — Wed, 27 Sep 2023 21:23:37 +0000

Big Time Exterminator: The Unexpected Hero in the Cannabis Chronicles

Steve was a pretty chill guy. He had a small cannabis farm, “Steve’s Serene Greens.” With state regulations becoming more rigorous, Steve prided himself on running a tight, organic ship.

But there was a hiccup: spider mites. These tiny villains had declared war on Steve’s precious plants. At first, Steve tried some home remedies. He tried playing them death metal, hoping they’d get scared and leave. No luck. He even tried reasoning with them. “Listen, little buddies, can’t we coexist?” They didn’t respond, of course, just kept munching away.

One evening, while Steve was sobbing into his herbal tea, his friend Lisa recommended, “You need Big Time Exterminator!” She raved about how it was almost 100% organic and could be used daily without any residues.

Steve was skeptical. “Big Time Exterminator? Sounds like a WWE wrestler.”

But desperate times called for desperate measures. He decided to give it a shot. The next day, a box arrived. The logo? A buff insect in sunglasses, flexing its muscles. Steve smirked, “Well, this should be interesting.”

Reading the instructions, Steve learned that Big Time Exterminator relied on mechanical action. It wouldn’t poison the mites but would break them down physically. “Alright, buff insect, let’s see if you can wrestle these mites,” Steve muttered, spraying his plants.

Within a few days, Steve noticed a drastic difference. The mites, those tiny terrorists, were vanishing. His plants looked happier, and Steve could swear they were swaying to a more joyous rhythm.

Pleased, Steve researched more about Big Time Exterminator. He discovered its broad-spectrum effectiveness and how it was eco-friendly. Steve was sold. This wasn’t just a pesticide; this was the future!

At the next Cannabis Cultivators’ Community meetup, Steve couldn’t help but gush about Big Time Exterminator. Many were curious, especially after seeing the before and after photos of Steve’s plants.

Tom, a fellow cultivator, commented, “Look at you, Steve! From mite infested to best-dressed plants!” The room erupted in laughter.

It wasn’t long before Big Time Exterminator became the talk of the town. Steve’s Serene Greens flourished, and Steve even collaborated with the company to release a special edition with his face on it – alongside the buff insect, of course.

State inspectors were thrilled with the organic methods Steve employed. And as word spread, more and more growers transitioned to Big Time Exterminator. The cannabis community was buzzing – not just because of their product, but also their pest-free plants!

A year later, at the annual Cannabis Gala, Steve was honored for his commitment to organic farming and innovation. Holding the award, Steve chuckled, “All thanks to a buff insect and some mechanical action!”

And that, dear readers, is the legend of how Big Time Exterminator took the cannabis world by storm. It was more than just a product; it was a revolution. And Steve? Well, he became the unexpected hero in the cannabis chronicles. All while staying 99.999% organic.

Hope you enjoyed this entirely fictional story. Steve’s name has been changed or fabricated entirely. When has anyone named Steve ever steered you wrong!

Cheers

-Management

In upcoming episodes Steve is gonna take on russet mites and the early nor cal rain. With who else, his trusty pal, Big Time Exterminator now available in 1-55 gallon containers order below.

[ux_product_flip ids=”13,310″]

The post Big Time Exterminator: The Unexpected Hero in the Cannabis Chronicles S:01 E:01 appeared first on Big Time Gardens.

Big Time Exterminator

austin sherman — Tue, 15 Aug 2023 22:23:15 +0000

The Rise of Big Time Exterminator: A Revolution in Cannabis Pest Control

The world of cannabis cultivation, like any other form of agriculture, is susceptible to a host of challenges. One of the most significant challenges growers face is pests. They can wreak havoc on a crop, reducing yields and compromising the quality of the end product. But what if there was a solution that’s almost entirely organic and so safe that it can be used up to the day of harvest? Enter: Big Time Exterminator, the pesticide game changer.

What is Big Time Exterminator?

Big Time Exterminator is a groundbreaking pesticide specially designed for cannabis plants. It boasts a 99.999% organic formula, with just 0.01% Potassium Sorbate, ensuring minimal chemical intervention while maintaining its potency against pests.

Benefits of Using Big Time Exterminator

1. Daily Use with No Residue: Unlike many other pesticides that require a waiting period before harvesting, Big Time Exterminator can be used daily, right up to the day of harvest. This is a boon for growers who experience last-minute pest infestations, ensuring that they don’t have to compromise on the safety or quality of their crops.

2. Mechanical Action: Instead of relying on harmful chemicals, Big Time Exterminator uses a mechanical action to destroy pests. This means it targets bugs, larvae, and eggs, breaking them down physically rather than chemically, preventing pests from developing resistance.

3. Broad Spectrum of Effectiveness: The pesticide is potent against both hard and soft-bodied pests. Whether it’s spider mites, broad mites, or the elusive root aphids, Big Time Exterminator has got you covered.

4. Safe for Ecosystem: While highly effective against insects, this pesticide is completely safe for plant, animal, and marine life. For growers who are eco-conscious and want to ensure they’re not harming the larger environment, this is a significant advantage.

The Need for Organic Solutions

The push for organic cannabis cultivation is stronger than ever. Consumers are becoming more conscious of what they consume and are demanding products that are free from harmful chemicals. Big Time Exterminator fits perfectly into this paradigm, offering an almost entirely organic solution that does not compromise on effectiveness.

Final Thoughts

In an industry where quality and safety are paramount, solutions like Big Time Exterminator are more than just products; they are revolutions. By giving growers the power to combat pests in an eco-friendly manner, without jeopardizing the quality of their crops, it truly stands out as a beacon for sustainable and responsible cultivation.

For cannabis growers, whether small-scale or commercial, it’s time to make the big switch to Big Time Exterminator and ensure your crops are both high-quality and eco-friendly. Because when it comes to cannabis cultivation, every detail matters.

The post Big Time Exterminator appeared first on Big Time Gardens.

How to Kill Spider Mites

austin sherman — Tue, 22 Sep 2020 01:23:01 +0000

How to Kill Spider Mites

So you’ve found this page because you have a spider mite infestation. Follow these simple instructions and learn how to kill spider mites..1,2,3!

Step One: Order enough Big Time Exterminator to treat your infestation with 150-200mL per gallon, depending on severity of infestation and environment.

Step Two: In the dark, with the fans off, throughly foliar spray Big Time Exterminator until the point of run-off on the tops and bottoms of the leaf surfaces.

Step Three: Repeat step two every 48 hours, until infestation is gone.

*Up to 250mL per gallon may be necessary to kill the worst spider mite infestations, especially outdoors and in greenhouses. Daily treatments may be necessary for 1-3 days to achieve control.

**Rinsing the plants with a heavy spray of water after foliar spraying will help rinse off the dead bugs and un hatched eggs. Be careful not to damage your plants doing this.

***When spraying high concentrations (150mL per gallon +) check PH and adjust it to be above 5.0 if necessary. Some plants will exhibit downward leaf curl in new growth when foliar sprayed with too low of a PH solution.

Thats how to kill Spider Mites…1,2,3.

[ux_products columns=”3″ ids=”13,6293,6301″]

The post How to Kill Spider Mites appeared first on Big Time Gardens.